Editing a dive
When you want to edit a dive, press the Edit button in the dive detailor dive profile view. This will show the table for editing all information aboutthe dive.
All fields with a on their right side lead to further forms for setting the associated information.All other fields are directly editable by tapping these fields. This will let a keyboard come up.
All main information of the dive are listed in the first section of the table.
Tapping on the Date-Field brings up the date picker to adjust your dive'sdate.
If you tap on the Time-field, you get to the time picker to set yourdive's time of day.
Same is valid for the dive length that you edit after tapping on the Dive Time-field.
All information regarding dive site, i.e. wheater, air temperature andaltitude range, can be modified in the section following the main information.
Tapping on the Weather-field lets you choose the whether during the dive.
In the Altitude-form you can set the altitude range that matches thealtitude of your dive site.
In section Equipment you can set the suit type and tank size.
After tapping the Suit-field you can choose the type of yourdive suit you used during the dive.
In section Dive Details all other information about your divecan be set and entered.
When you want to enter the interval between current and previous dive,you do so by tapping on the Interval-field.
The minimum temperature is the lowest water temparature during thedive. The air consumption depicts the difference between the yourtank pressure shown by your pressure gauge at beginning and end of your dive.
After tapping the Dive Type-field you can set whether you respectedthe no stop time or required decompression stops. In addition, you canenter whether you performed a single or multiple ascents. Apart from thisyou may also set type of water, i.e. fresh water or salt water, and type ofair, i.e. regular air, Nitrox or rebreather (SCR).
Of course you can also edit the name of your dive body and the diveactivities.
Every information still missing you may enter in the Comment-field.
Just press the Done-button to keep the settings you performed.